The PoE switch support IEEEE802.3af / at
PoE standard, using advanced sensing algorithm, only for the terminal device which support the IEEEE802.3af / at power over Ethernet standard, do not need to worry about damage to private standard PoE or non PoE devices. Automatic recognition of PoE demand , speed, duplex and using the Auto Uplink cable, simple and convenient to use no need to configure plug and play.
The PoE switch designed for commercial network, for example, some need to simplify the wireless access point (AP) and network camera installation based on IP. These away for the power socket device usally hung on the walll or the ceiling height. PoE eliminated the equipment specially conneded with the power socket. The connection from the AC power supply equipment more flexiible , simplified wiring, flexible and extensible, get rid of affection by power line layout constraints in family and office network.
Designed of high performance to price ration compact flexible, EC series is the ideal choice of small business netwok to economical use of PoE deployment of wireless acess point (AP) and IP cameras.
Intelligent power management, if the electrical equipment power exceeds the normal power output, the system will cut off power supply of the port, after 1-2 minutes. I will reexamiantion and power supply.
Main Features
- Store and forwarding, support port isolation
- 6 10 /100M adaptive RJ45 port, 4 port with PoE
- Support two lighting of uplink port
- Low power consumption, no fan design
- Full-Duplex or Half-Duplex adaptive
- Supports IEEE803.3.af/af standards
- Can provides 15.4W / 30W per port
- Automatic detection and recognition PD device
witch in accordance with IEEE803.3.af/af and
power supply for the device
PORT AND PERFORMANCE
RJ45 Port
- Port number:6
- PoE port number: 4
- Port type: RJ45 adaptive
- Port Rate: 10/ 100M
- Cable type: CAT5 or bett
- Protocol standard IEEE 802.3i 10 BASE T:
- IEEE 802.3u 10 BASE TX:
- IEEE 802.3 x Flow Control:
- IEEE 802.3 af / at Power over Ethernet
Performance specifications
- Store and forwarding
- Backplane bandwidth: 1G
- Transfer mode: Full-Duplex or Half-Duplex adaptive
- Addressing: 48 bit MAC address
- Mac Address: Table-1K
- Network delay: 100Mbps to 100 Mbps, less than 20 ms under 6-4 byte frame
- LED indicator Each Port: ACT. LINK indicator
- LED indicator Each Device: Power and PoE indicator
- Port protection Meets IEC61000-4-2 (ESD) ± 15KV (air)± 8KV (contanc) and can bear energy of 8/20us 24A (12A)
POE *
- PoE Support IEEEE802.3af / at (15.4W / 30W)
- PoE power supply parameter single port: 15.4W /30 W
- MAX Power : 65 W Serials
- Power supply mode data line 1/2 (+). 3/6 (-): spare line 4/5 (+). 7/8 (-) optional
- Power Supply Distance Maximum power distance with CAT5 UTP; 100 meters
POWER*
ENVIRONMENT *
- Authentication CE / LVD
- Working Temperature 0°C ~ 55°C / 32°F ~ 131°F
- Storage Temperature -20°C ~ 70°C / -4°F ~ 158°F
- Humidity Non Condensing 10% ~ 90%
MECHANICAL *
- Dimensions L* W* H 118mm x 89mm x 25mm (4.6” x 3.5 “ x .98” (inches)
- Color Black