The COR-ACC890BIO Cortex Security biometric finger print and proximity card reader is designed for outdoor or indoor placement. Made for long life performance with an aluminum security frame and sealed front panel. The on-board controller, relay and input/output triggers perform independently for standalone applications or can be networked via RS-485 or TCP/IP networks. Main Features Indoor/Outdoor design Protection Standard IP65 Zinc Alloy Metal case Compact metal reinforced frame Slim...

The COR-ACC890KP proximity card reader is designed for outdoor or indoor placement. Made for visibility, the large display is easy to see. LEDs and a beeper provide feedback. An illuminated touchpad and slim body design allows placement in low light tight areas. Constructed of tough zinc alloy. This unit's communication interface allows for RS-485 and TCP/IP. Main Features Indoor/Outdoor design Protection Standard IP65 Zinc Alloy Metal case 1024 users, 1200 event logs Slim design allows...

Proximity Card Reader with Advanced Access Control Device in a Weather-Proof case. The COR-ACC980IP proximity card reader is an advanced access control device in a weather-proof case. It reads proximity cards and has an illuminated touchpanel to accept personal identification numbers (PINs). When a user presents a card, an audio (beeper and visual bicolor red/green LED) feedback indicates the card is recognized. For additional security, the touchpanel can be programmed to require PIN entry. It...

The COR-ACC980 (and IP addressable model COR-ACC980IP) proximity card reader is an advanced access control device in a weather-proof case. It reads proximity cards and has an illuminated touch-panel to accept personal identification numbers (PINs). It can operate in network or standalone mode. Maximum card read distance is approximately 7 inches. Constructed of tough ABS plastic, aluminum alloy and sealed against the weather. From Cortex Security Main Features Indoor/Outdoor design LED &...

The COR-ACC940 Wiegand proximity cardreader is an advanced access control device in a grey ABS case that uses a built-in bicolored LED and beeper to provide users with a visual and audible indication that a card has been scanned. It can operate in standalone mode or in networking configurations. This indoor proximity card reader works great and has an LED to indicate positive card read, and a buzzer. Great for interior doors and areas where access must be monitored or controlled. Best when...

The COR-ACC950 proximity card reader is an advanced access control device in a weather-proof case that uses an LCD panel and LEDs to provide users with a visual indication that a card has been successful scanned. A beeper provides audio feedback. It can operate in network or standalone mode ( detects mode automatically). Control mode, card capacity and card type are assignable by user directly. Maximum distance is approx. 18 cm (7 inches), depending on weather conditions and setup. Constructed...

The COR-ACC960 proximity card reader is an advanced access control device in a hardened zinc alloy weatherproof metal case that uses a touchpanel keypad for PIN entry. It also has a mini transducer that emits an audible “beep” when a successful operation is performed. It can be programmed for PIN and card, or PIN only, or card only operation. The hardened case provides a substantial barrier to vandalism and physical attacks and the sealed face helps keep the unit weatherproof. Best when used...

The COR-ACC970 proximity card reader is an advanced access control device in a zinc alloy weatherproof metal case that provides an LCD panel used for programming and to pass messages to the user The design is weatherproof and vandal resistant which makes it suitable for outdoor applications. Built-in watchdog and anti-tamper functions. Easily integrated with other CORE access products. This advanced card reader is designed for outdoor placement and contains a door control relay. It's resistant...

Ideal for outdoor applications Standard Wiegand Interface to controller Compatible with all standard access control systems Cost-effective UHF long read range passive tags Adjustable between 860-960MHz by order Wiegand and RS-485 communication 1 Bi-Color LED indicator Perfect for parking garage management

Programming Keyboard used with ACC-890 Reader.

Cortex Access Reader for standalone or network systems12 character numeric keypadVisual feedback: 1 red/green LEDAudible feedback: Internal transducer (buzzer/beeper)Keypad will lock for 30 seconds after continuous error operation11 sets of time codesUp to 120 holiday schedulesBuilt-in watchdog to prevent system haltingSupport delay relay auto-relock functionRS-485 support for networking (via controller or directly)User assigns control mode, card capacity and card typeRF Frequency / Reading...

The EZ-Pass proximity card reader is designed for outdoor placement. Made for visibility, the large display is easy to see. LEDs and a beeper provide feedback. Programming may be done by plugging in the keyboard (sold separately). Constructed of tough aluminum alloy. Main Features Indoor/Outdoor design LED and audio indicators Metal case