The COR-HTBPK has built in noise reduction to help boost your video signal without unwanted lines for up to 980ft (depending on cable quality and video signal). Work with Analog and Analog High Definition signals. This passive pair transceiver & receiver transmits video and power over 2 wire conductor (we recommend CAT5E/CAT6 twisted pair). Main Features Transmit HD-CVI/TVI/AHD video and power over one CAT5e cable Includes 2 units: 1 x RJ45 to BNC with DC power plug 1 x RJ45 to BNC with DC...

4-Channel Passive Video Receiver Balun for CCTV cameras Transmitting the real-time HD signal of PAL,NTSC and SECAM;No power required;Exceptional Interference Rejection and Built-in Protection Setting;Convenient Wiring Installation, Higher Cable Utilization Rate and Lower Composite Wiring Cost.

4-channel passive video transceiver;Transmitting the real-time signal of PAL,NTSC and SECAM;No power required; Use for HD CCTV CamerasExceptional interference rejection and built-in protection setting;Convenient wiring installation, higher cable utilization rate and lower composite wiring cost;

4-Channel,Active power Sender/Receiver

Single channel passive video transceiver;Transmitting the real-time signal of PAL,NTSC and SECAM;No power required; Exceptional interference rejection and built-in protection setting;Convenient wiring installation,higher cable utilization rate and lower composite wiring cost;Compact size

This passive video balun connects a coax cable (using a BNC style connector) to 8-conductor twisted pair cable (bare wire terminal block connectior). It balances impedance and acts as an electrical filter, reducing noise and improving video quality.

This passive video balun connects a BNC coax cable to 8-conductor twisted pair cable (RJ-8 or RJ-45 type connector). It balances impedance and acts as an electrical filter, reducing noise and improving video quality.

This HD-SDI UTP Protects equipment from high voltage surges such as lightning strikes. UL grounding requirements for coaxial cable offer protection from hazardous voltages that may occur on the shielding. Because of the physical length of ground wires, UL grounding systems may appear as an open circuit to lightning caused, high frequency surges and provide no protection from these surges getting into a home and destroying CATV converters, TV sets, VCR, Camera etc. Applications CATV Systems...

The COR-HDR200 has a built in surge protector, with a light weight, compact size, and is an easy solution for signal boosting. This HD-SDI distance extension device can extend video transmission up to 950ft (depending on cable quality used). Main Features and Specifications Power Input : DC12V/0.5A Signal Output Terminal Block 2P Extend video transmission up to 950ft

This HD-SDI UTP transmitter is a long distance transmission device over 2 wire conductor (we recommend CAT5E/CAT6 twisted pair). This device transmits the HD-SDI signal up to 500ft over 1 pair UTP cable without using a repeater. Comes in a compact size and provides a terminal block for easy installations. Main Features HD-SDI signal boosters Extend up to 1300ft Built in surge protection Sold as a set of 2 Compact size Power supply sold separately ...

The COR-HTBS has a 4 inch pigtail which allows you to connect cameras to the DVR without space restraints. Boosts video signals up to 1300ft (depending on cable quality and video signal) without power. Works with analog and analog high definition signals. This passive pair balun with built in surge protector offers a convenient and cost effective solution to transmitting video signal over 2 wire conductor (we recommend CAT5E/CAT6 twisted pair). Main Features Boosts video signals up to 1300ft...

This passive video balun connects a BNC coax cable to 8-conductor twisted pair cable (RJ-8 or RJ-45 type connector). It balances impedance and acts as an electrical filter, reducing noise and improving video quality.