Cortex Security Surveillance Products

This red illuminated button is mounted on a metal plate that can be secured to a wall near the door it effects. The wide operating temperature range makes it suitable for a number of environments. Main Features Durable stainless steel plate 1M cycles min. rated switch life Single pole NO/NC momentary contact switch 1.2W lamp, 12VDC (60V max.) Contact rating: 300VAC/3A max. Operation Temperature: -20° C ~ 55° C (-4° F ~ 131° C) Dimensions: 120mm x 76.2mm x 82mm (4.72" x 3.00" x 3.23") ...

The COR-VC9 is a color doorbell cameras designed for outdoor wall or post placement. It has a weatherproof case, a doorbell activation button, microphone, speaker, and CCTV security camera. Perfect for high security location like police departments, casinos, banks, research facilities and storage areas that contain valuable equipment or irreplaceable property. Main Features Medal Weatherproof Case Doorbell activation Button Microphone, speaker, camera include/li> Upgrade 2 System ...

The COR-ACC890BIO Cortex Security biometric finger print and proximity card reader is designed for outdoor or indoor placement. Made for long life performance with an aluminum security frame and sealed front panel. The on-board controller, relay and input/output triggers perform independently for standalone applications or can be networked via RS-485 or TCP/IP networks. Main Features Indoor/Outdoor design Protection Standard IP65 Zinc Alloy Metal case Compact metal reinforced frame Slim...

The COR-ACC940 Wiegand proximity cardreader is an advanced access control device in a grey ABS case that uses a built-in bicolored LED and beeper to provide users with a visual and audible indication that a card has been scanned. It can operate in standalone mode or in networking configurations. This indoor proximity card reader works great and has an LED to indicate positive card read, and a buzzer. Great for interior doors and areas where access must be monitored or controlled. Best when...

The COR-ACC890KP proximity card reader is designed for outdoor or indoor placement. Made for visibility, the large display is easy to see. LEDs and a beeper provide feedback. An illuminated touchpad and slim body design allows placement in low light tight areas. Constructed of tough zinc alloy. This unit's communication interface allows for RS-485 and TCP/IP. Main Features Indoor/Outdoor design Protection Standard IP65 Zinc Alloy Metal case 1024 users, 1200 event logs Slim design allows...

The COR-ACC970 proximity card reader is an advanced access control device in a zinc alloy weatherproof metal case that provides an LCD panel used for programming and to pass messages to the user The design is weatherproof and vandal resistant which makes it suitable for outdoor applications. Built-in watchdog and anti-tamper functions. Easily integrated with other CORE access products. This advanced card reader is designed for outdoor placement and contains a door control relay. It's resistant...

The COR-ACC960 proximity card reader is an advanced access control device in a hardened zinc alloy weatherproof metal case that uses a touchpanel keypad for PIN entry. It also has a mini transducer that emits an audible “beep” when a successful operation is performed. It can be programmed for PIN and card, or PIN only, or card only operation. The hardened case provides a substantial barrier to vandalism and physical attacks and the sealed face helps keep the unit weatherproof. Best when used...

In-line metal splice. Nickel plated with teflon insulated copper core.

In-line metal splice. Nickel plated with teflon insulated copper core.

This high quality 2 piece BNC is designed for RG59 Coax. Nickel plated with teflon insulated copper core. Cortex Provides only pro grade, top level metal connectors that can been Quality approved by our team for peak performance. Problems with low cost alternatives: 1. Fall apart and separate. 2. Metal collapses during crimping. 3. Improper size and design create intermittent connections from Cortex Security

In-line metal splice. Nickel plated with teflon insulated copper core.

Commonly referred to as a RJ45 or RJ45C style connector, this 8-pin connector is used primarily to terminate Ethernet or powered Ethernet (power-over-Ethernet or PoE) network cables.