The COR-ACC910 Wiegand proximity card reader is an advanced access control device in a silver-tone ABS case that uses a built-in bi-color LED to provide users with a visual indication that a card has been successfully scanned.
It also has a min transducer that emits an audible “beep” when a successful operation is performed. Use the ACC900,. ACC950, ACC995 and ACC10000 CORE model access controllers for anti-pass back. It is sealed for outdooruse and has an attached cable and connector that makes installation easy and simple
Main Features
- Indoor/Outdoor design
- Tamper switch
- Construction ABS plastic
- Bi-color LED (Red/Green),one beeper
- Silver grey finish
- Network / Communication: WG 26 / 34, ABA-II, ASYNC
- Baud rate: 9600 bps (N,.8,1)
- Data format: RS232
- Maximum # users :
- 65,536 (card only)
- 1024 using combination of card and PIN (using attached controller or peripheral keypad)
- LED feedback
- Acoustic feedback (buzzer)
- Anti-pass back: multi-door when used with COR-ACC1000
- Remote operation supported when used with COR-ACC1000
- Wiegand port: 1 (WG26, WG34)
- Request to exit supported
- Reader range 8cm (3.5 inches)
- DI inputs: egress button, door contact, arming switch
- Made of ABS plastic
- Input voltage 9 - 16 VDC
- Power requirement: ~70mA
- Dimensions (mm):
- 81mm (L) 43mm (W) 18mm (H)
- Dimensions (inches):
- 3.19 inches (L) 1.69 inches (W) .41 inches (H)
- Operating temperature: -20 ˚ C to +75 ˚ C (-4 ˚ F to + 167˚ F)
- Temperature/humidity: -10 C - 50 C (14 F - 122 F) @ 0-90% relative humidity non-condensing
- Weight: 40g (+/1 5g)