Solid aluminum brackets with hardware kit and instructions for use with our COR-ACC150 300 pound magnetic lock.This aluminum bracket are predrilled and designed for easy installation. Main Features Solid aluminum parts Anodized surface Machined slots, ports and holes Installation kit and drilling template included

Solid aluminum brackets with hardware kit and instructions for use with our COR-ACC300 600 pound magnetic lock.This aluminum bracket are predrilled and designed for easy installation. Main Features and Specifications Solid metal Anodized finish Machined slots, ports and holes Multiple configurations possible with the same kit Dimensions: 250mm x 48mm x 30mm (9.84" x 1.89" x 1.18")

This red illuminated button is mounted on a metal plate that can be secured to a wall near the door it effects. The wide operating temperature range makes it suitable for a number of environments. Main Features Durable stainless steel plate 1M cycles min. rated switch life Single pole NO/NC momentary contact switch 1.2W lamp, 12VDC (60V max.) Contact rating: 300VAC/3A max. Operation Temperature: -20° C ~ 55° C (-4° F ~ 131° C) Dimensions: 120mm x 76.2mm x 82mm (4.72" x 3.00" x 3.23") ...

When a "fail-safe" electric door lock looses power its default position is to unlock (or unsecure) the door. Application of power is required to lock (secure) the door. This type of door strike should be used with caution as doors will unlock in the event of a power failure. Always consult fire codes and second stage manual had lock requirements. Main Features Fail-secure door strike High strength solenoid 300kg holding force Anodized aluminum housing ...

When a "fail-secure" electric door lock looses power its default position is to lock (or secure) the door. Application of power is required to open (unsecure) the door. This type of door strike should be used with a good degree of forethought and suitable caution with respect to personnel who may become trapped in the event of a power failure. Always provide a secondary stage manual hand lock that can be released during emergencies. Main Features Fail-secure door strike High strength solenoid...

The COR-ACC12Z package is composed of three brackets that can be used to install the COR-ACC-500 maglock to a door frame, an L-bracket and two right angle brackets. The two right angle brackets can be used together in a “Z configuration,” used separately or modified as necessary to work with the door. All parts are made from aluminium alloy and have an anodized finish. This aluminum bracket are predrilled and designed for a COR-ACC500 and similar products. 1200lb magnetic lock Machined slots,...

The COR-ACC890BIO Cortex Security biometric finger print and proximity card reader is designed for outdoor or indoor placement. Made for long life performance with an aluminum security frame and sealed front panel. The on-board controller, relay and input/output triggers perform independently for standalone applications or can be networked via RS-485 or TCP/IP networks. Main Features Indoor/Outdoor design Protection Standard IP65 Zinc Alloy Metal case Compact metal reinforced frame Slim...

The COR-ACC890KP proximity card reader is designed for outdoor or indoor placement. Made for visibility, the large display is easy to see. LEDs and a beeper provide feedback. An illuminated touchpad and slim body design allows placement in low light tight areas. Constructed of tough zinc alloy. This unit's communication interface allows for RS-485 and TCP/IP. Main Features Indoor/Outdoor design Protection Standard IP65 Zinc Alloy Metal case 1024 users, 1200 event logs Slim design allows...

Proximity Card Reader with Advanced Access Control Device in a Weather-Proof case. The COR-ACC980IP proximity card reader is an advanced access control device in a weather-proof case. It reads proximity cards and has an illuminated touchpanel to accept personal identification numbers (PINs). When a user presents a card, an audio (beeper and visual bicolor red/green LED) feedback indicates the card is recognized. For additional security, the touchpanel can be programmed to require PIN entry. It...

The COR-ACC980 (and IP addressable model COR-ACC980IP) proximity card reader is an advanced access control device in a weather-proof case. It reads proximity cards and has an illuminated touch-panel to accept personal identification numbers (PINs). It can operate in network or standalone mode. Maximum card read distance is approximately 7 inches. Constructed of tough ABS plastic, aluminum alloy and sealed against the weather. From Cortex Security Main Features Indoor/Outdoor design LED &...

The COR-ACC940 Wiegand proximity cardreader is an advanced access control device in a grey ABS case that uses a built-in bicolored LED and beeper to provide users with a visual and audible indication that a card has been scanned. It can operate in standalone mode or in networking configurations. This indoor proximity card reader works great and has an LED to indicate positive card read, and a buzzer. Great for interior doors and areas where access must be monitored or controlled. Best when...

The COR-ACC950 proximity card reader is an advanced access control device in a weather-proof case that uses an LCD panel and LEDs to provide users with a visual indication that a card has been successful scanned. A beeper provides audio feedback. It can operate in network or standalone mode ( detects mode automatically). Control mode, card capacity and card type are assignable by user directly. Maximum distance is approx. 18 cm (7 inches), depending on weather conditions and setup. Constructed...